Solar modulation of cosmogenic nuclide production over the last millennium: comparison between C and Be records     

Edouard Bard  Grant M. Raisbeck  Franoise Yiou  Jean Jouzel 《Earth and Planetary Science Letters》1997,150(3-4):453-462

For about the last 30 years it has been recognized that the high frequency component of the tree rings ¹⁴C/¹²C record is dominated by the modulation of the cosmic ray flux by the solar wind. In particular, it has been demonstrated that the three most recent periods of low sunspot occurrence were characterized by high values of atmospheric ¹⁴C/¹²C. During the last millennium other periods of high ¹⁴C/¹²C values were observed but their solar origin is still debatable. In the present work we compare these fluctuations with an independent record of cosmogenic ¹⁰Be measured in ice from the South Pole to check the solar origin of the observed ¹⁴C/¹²C variations. In order to compare quantitatively the results obtained on ¹⁰Be and ¹⁴C, it is necessary to take into account the different behaviour of these two cosmogenic isotopes, and especially the damping effect of the carbon cycle in the case of ¹⁴C. As an input to a 12-box numerical model we used the relative fluctuations of the ¹⁰Be concentrations record measured in South Pole ice and converted it into a synthetic ¹⁴C record. We took into account the fact that ¹⁰Be modulation is enhanced in polar regions due to the orientation of the geomagnetic field. As expected, the fluctuations of the modelled ¹⁴C record are much smaller (a factor of 20) than those observed for the raw ¹⁰Be record. In addition, the variations are smoother and shifted in time by a few decades. The ¹⁰Be-based ¹⁴C variations closely resemble the ¹⁴C measurements obtained on tree rings (R = 0.81). In particular, it is easy to identify periods of maximal ¹⁴C/¹²C which correspond to solar activity minima centred at about 1060, 1320 (Wolf), 1500 (Spörer), 1690 (Maunder) and 1820 (Dalton) yr A.D. Cross-correlation calculations suggest that there is no significant lag between the ¹⁰Be-based ¹⁴C and the tree-ring ¹⁴C records. Our study strongly suggests the dominance of the solar modulation on the cosmonuclide production variations during the last millennium.  相似文献   

Effect of scallop shells and sediment grain size on phytoplankton flux to the bed     

C.A. Pilditch  C.W. Emerson  J. Grant 《Continental Shelf Research》1997,17(15):1869-1885

A flume study was made of bed skin friction and phytoplankton (Thalassiosira weissf ogii) deposition about a sea scallop (Placopecten magellanicus) mimic on a coarse (mean grain dia. =1200 μm), medium (615 μm) and fine (170 μm) quarry sand. Bed skin friction immediately upstream, and at one shell diameter downstream of the mimic was 1.2–2.4 times higher than ambient values (8.1 × 10⁻² Pa). Directly downstream of the mimic there was a region of near-zero skin friction. Bed diatom density was correlated with changes in skin friction; after 21 h, cell densities were 36–87% greater in the regions of high skin friction upstream and downstream of scallop than in control experiments. The pattern of bed diatom density about the scallop was similar in the coarse and medium sands, but deposition to the fine bed was not affected by the mimic. Diatom density was significantly correlated with grain diameter; deposition in the coarse bed was 2.3 times higher than in the medium sand, and 7.4 times higher than in the fine sand. A field experiment confirmed that the coarse sand was a greater sink of phytoplankton pigment than the fine sand. Previous studies and scaling arguments suggest that the differences in bed diatom density were controlled by the magnitude of interfacial solute fluxes. Regions of high skin friction about the mimic increased the porewater exchange, resulting in greater concentrations of diatoms retained within the bed. Similarly, the more permeable coarse sand would have a greater rate of porewater exchange than the fine sand, explaining the higher bed diatom density. Differences in the predicted volume of interstitial void space as a function of grain size closely matched the observed differences in bed diatom density. Results suggest that alteration of boundary layer flows by centimetre scale topography such as scallops, increases the flux of particulate organic matter toward the bed, but whether it is retained within the bed, and thus made available to the benthos is dependent on the sediment granularity.  相似文献   

Estimated N2O and CO2 Emissions as Influenced by Agricultural Practices in Canada   总被引：4，自引：0，他引：4  

B. Grant  W. N. Smith  R. Desjardins  R. Lemke  C. Li 《Climatic change》2004,65(3):315-332

The Denitrification-Decompostion (DNDC) model was used to estimate the impact of change in management practices on N₂O emissions in seven major soil regions in Canada, for the period 1970 to 2029. Conversion of cultivated land to permanent grassland would result in the greatest reduction in N₂O emissions, particularly in eastern Canada wherethe model estimated about 60% less N₂O emissions for thisconversion. About 33% less N₂O emissions were predicted for a changefrom conventional tillage to no-tillage in western Canada, however, a slight increase in N₂O emissions was predicted for eastern Canada. GreaterN₂O emissions in eastern Canada associated with the adoption of no-tillage were attributed to higher soil moisture causing denitrification, whereas the lower emissions in western Canada were attributed to less decomposition of soil organic matter in no-till versus conventional tilled soil. Elimination of summer fallow in a crop rotation resulted in a 9% decrease in N₂O emissions, with substantial emissions occurringduring the wetter fallow years when N had accumulated. Increasing N-fertilizer application rates by 50% increased average emissions by 32%,while a 50% decrease of N-fertilizer application decreased emissions by16%. In general, a small increase in N₂O emissions was predicted when N-fertilizer was applied in the fall rather than in the spring. Previous research on CO₂ emissions with the CENTURY model (Smith et al.,2001) allowed the quantification of the combined change in N₂O andCO₂ emissions in CO₂ equivalents for a wide range of managementpractices in the seven major soil regions in Canada. The management practices that have the greatest potential to reduce the combined N₂O andCO₂ emissions are conversion from conventional tillage to permanent grassland, reduced tillage, and reduction of summer fallow. The estimated net greenhouse gas (GHG) emission reduction when changing from cultivated land to permanent grassland ranged from 0.97 (Brown Chernozem) to 4.24 MgCO₂ equiv. ha^–1 y^–1 (BlackChernozem) for the seven soil regions examined. When changing from conventional tillage to no-tillage the net GHG emission reduction ranged from 0.33 (Brown Chernozem) to 0.80 Mg CO₂ equiv. ha^–1 y^–1 (Dark GrayLuvisol). Elimination of fallow in the crop rotation lead to an estimated net GHG emission reduction of 0.43 (Brown Chernozem) to 0.80 Mg CO₂ equiv.ha^–1 y^–1 (Dark Brown Chernozem). The addition of 50% more or 50% less N-fertilizer both resulted in slight increases in combined CO₂ and N₂O emissions. There was a tradeoff in GHG flux with greaterN₂O emissions and a comparable increase in carbon storage when 50% more N-fertilizer was added. The results from this work indicate that conversion of cultivated land to grassland, the conversion from conventional tillage to no-tillage, and the reduction of summerallow in crop rotations could substantially increase C sequestration and decrease net GHG emissions. Based on these results a simple scaling-up scenario to derive the possible impacts on Canada's Kyoto commitment has been calculated.  相似文献   

Analytical methods Of assessing the image quality associated with digital and photographic imaging systems     

Grant H. Thomson 《The Photogrammetric Record》2004,19(107):237-249

The introduction of digital cameras for aerial survey photography and use of scanners with processed aerial film present a number of technical questions concerning the way photography is to be acquired in the future. Among the questions to be addressed are the comparative metric properties of images acquired by each system and the associated image quality characteristics. The new digital camera systems will require very careful appraisal, using well-established methods of assessing metric quality already available to survey organisations. The questions concerning image quality are more difficult to answer, as they require very specialised instrumentation if measurements are to be made directly in practice. Over the course of the past several decades a more analytical approach to assessing image quality has emerged, and one that may be used by individuals. The method is particularly effective where information on the micro-image characteristics of products is made available by the manufacturers concerned. An outline is given of some considerations that need to be taken into account when using an analytical approach, with references given for further reading.  相似文献   

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study   总被引：3，自引：0，他引：3  

Joanna E. Bullard  Grant H. McTainsh†  Christa Pudmenzky† 《Sedimentology》2004,51(5):1103-1125

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.  相似文献   

Testing a statistical curve‐fitting procedure for quantifying sediment populations within multi‐modal particle‐size distributions     

John Leys  Grant McTainsh  Terry Koen  Brian Mooney  Craig Strong 《地球表面变化过程与地形》2005,30(5):579-590

This paper describes a series of tests designed to evaluate the capacity of a personal computer (PC) based statistical curve‐fitting program called MIX to quantify composite populations within multi‐modal particle‐size distributions. Three natural soil samples were analysed by a Coulter Multisizer, and their particle‐size distributions analysed using MIX software to identify the modes, standard deviations and proportions of their composite populations. The particle‐size distributions of the three natural soil samples were then numerically combined in equal proportions using a spreadsheet program to create synthetic particle‐size distributions of known populations. MIX was then tested on the synthetic particle‐size distributions to see if the modes and proportions it identified were similar to those modes and proportions known to characterize the synthetic particle‐size distributions. The main outcome is that MIX can very accurately describe the modal particle size and proportions of the major composite populations within a particle‐size distribution. However MIX has difficulty in identifying small populations (those contributing <10 per cent of a total particle‐size distribution), particularly when they are located in the central sections of particle‐size distributions, overlain by larger populations, or when positioned in the fine tails of distributions. Despite these minor shortcomings, MIX is a valuable tool for the examination and interpretation of particle‐size data. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Public attitudes towards flooding and property-level flood protection measures     

Seth Owusu  Grant Wright  Scott Arthur 《Natural Hazards》2015,77(3):1963-1978

  相似文献   

Taxonomy,location of origin and health status of proboscideans from Western Canada investigated using stable isotope analysis          下载免费PDF全文

Jessica Z. Metcalfe  Fred J. Longstaffe  Christopher N. Jass  Grant D. Zazula  Grant Keddie 《第四纪科学杂志》2016,31(2):126-142

  相似文献   

The relation of Holocene fluvial terraces to changes in climate and sediment supply,South Fork Payette River,Idaho     

Jennifer L. Pierce  Grant A. Meyer  Tammy Rittenour 《Quaternary Science Reviews》2011,30(5-6):628-645

Well-preserved Holocene terraces along the South Fork Payette River in central Idaho provide a record of fluvial system behavior in a steep mountain watershed characterized by weathered and erodible Idaho Batholith granitic rocks. Terrace deposit ages were provided by ¹⁴C dating of charcoal fragments and optically stimulated luminescence (OSL) dating of sandy sediments. Along with pairing of many terrace tread heights, these data indicate episodic downcutting during the Holocene, with a mean incision rate of ～0.9 m/ka from ～7 ka to present. Prior to 7 ka, the river incised to within～3 m of current bankfull, but then aggraded by ～5 m over at least a ～10 km-long reach in an episode centered ～7–6 ka. Aggradation may relate to (1) increased hillslope sediment input from landslides and debris flows in steep tributary basins with abundant grussified granitic bedrock, (2) possible local landslide-damming of the channel, (3) decreased peak discharge, or (4) a combination of these factors. Middle Holocene channel aggradation ca. 7–6 ka corresponds with a period of prolonged and widespread aridity in the northern Rocky Mountains. Between ～5 and 1.3 ka, the river aggraded slightly and then remained stable, forming a prominent terrace tread at ～3 m above current bankfull. Modest aggradation to vertical stability of the South Fork Payette River at the 1.5 m terrace level ～1.0–0.7 ka corresponds with large fire-related debris flows in tributaries during Medieval droughts. Three intervals of incision (～5.5–5 ka, 1.3–1.0 ka and 0.5 ka) correspond with frequent but small fire-related sedimentation events and generally cooler, wetter conditions suggesting increased snowmelt runoff discharges. Other possible drivers of channel incision include an increase in stochastic or climate-modulated large storms and floods and a reduction in delivery of hillslope sediment to the channel. Aggradation is more confidently tied to climate through increases in hillslope sediment delivery and (or) decreased stream power, both likely related to warmer, drier conditions (including high-severity fires) that reduce snowmelt and decrease vegetation cover on steep slopes. Thus, the Holocene terraces of the South Fork Payette River do not reflect simple stepwise incision with periods of vertical stability and lateral migration, but record substantial episodes of aggradation as well. We infer that increases in hillslope erosion and mass movements combined with reduced discharges during prolonged droughts episodically reverse the post-glacial trend of downcutting, in particular during the middle Holocene. The present bedrock-dominated channel implies a strong tendency toward incision in the late Holocene.  相似文献   

Biostratigraphic and detrital zircon age constraints on the basement of the Himalayan Foreland Basin: Implications for a Proterozoic link to the Lesser Himalaya and cratonic India          下载免费PDF全文

Shuhai Xiao  Qing Tang  Nigel C. Hughes  N. Ryan McKenzie  Paul M. Myrow 《地学学报》2016,28(6):419-426

The Himalayan Foreland Basin in the Ganga Valley is key to assessing the pre‐collision relationship between cratonic India and the Himalaya – the world's largest mountain chain. The subsurface Ganga Supergroup, representing the sedimentary basement of the Ganga Valley, has been interpreted as a northern extension of the Proterozoic Vindhyan Supergroup in cratonic India. This interpretation is contentious because the depositional age of the Ganga Supergroup is not resolved: whereas the lower Ganga Supergroup is widely regarded as Proterozoic, the upper Ganga Supergroup has been variously inferred to include Neoproterozoic, lower Palaeozoic, or Cretaceous strata. Here, we integrate biostratigraphic and detrital zircon data from drill cores to show that the entire Ganga Supergroup is likely Proterozoic and can be correlated with Proterozoic successions on the northern Indian craton and in the Lesser Himalaya. This helps redefine the first‐order stratigraphic architecture and indicates broad depositional continuity along the northern Indian margin during the Proterozoic.  相似文献